Dual wall insulation XLPE Battery Cable Red / Red 2/0 AWG 3/8 inch Lugs – Made in USA

$15.00$55.00

Battery Cable Series Interconnect with ring terminals and heatshrink. Red heatshrink on one end and red heatshrink on the other end for use as a series battery cable. The lugs are 3/8 inch studs, non-insulated, closed end for corrosion resistance, tin plated ring terminals. 2/0 Gauge Heavy Duty solar cable. Ultra flexible & made with fine stranded 100% tinned copper wire. Dual wall insulation XLPE black color. UL 1232/1283/1346, 600V -40~+90 Celsius. Use for battery and Inverter inter connect.

Clear

Description

Dual wall insulation XLPE Jacket with Electron beam cross-linked

Heavy Duty Battery Cable Red / Red 2/0 AWG 3/8 inch. Compared with LLDPE, XLPE electrical characteristics reduce life-cycle operating losses. Shield losses due to circulating currents go down by approximately 2 percent, which brings energy costs down. XLPE also offers better mechanical characteristics. While typical wind installations of XLPE are direct buried, some applications require MV cable in duct. When used in a duct application, XLPE has a lower coefficient of friction for easier, faster pulling. XLPE s higher abrasion-resistance can also reduce potential cable damage during installation.

Product Details

Insulation MaterialXLPE
TypeHigh Current
ApplicationSolar PV System, Deep Cycle Battery Inter Connect, Inverter Inter Connect
Conductor MaterialTinned copper 100%
JacketXLPE
SizePV Cable 16mm2, 2/0 , 5/8, 0.625
ColorBlack
ConductorTinned 100% copper
InsulationHalogen Free Cross Linked Polylefin (XLPE)
Strand design224×0.3mm

Solar cable 16mm2 or 2/0 AWG

  • Dual wall insulation. XLPE Electron beam cross-linked
  • Resistance to U.V, oil, greases, oxygen and ozone
  • Resistance to abrasion
  • Halogen free, flame retardant, low toxicity
  • Ultra Flexibility and stripping performance
  • High current carrying capacity 225amp +
  • TUV approved / UL approved
Wire: Class 5, Tinned Copper100% UV resistant
Insulation material: XLPEHigh wear and abrasion resistance
Double insulatedFlame test according to :DIN EN 20265-2-1, UL1571(VW-1)
Halogen-freeSmallest permissible Bending Radius : 5 x D
Resistance against oil, greases, oxygen, ozoneTemperature range: -40~+90 Celsius degree
Micode- resistantColors: Black

 

Additional information

Weight3 lbs
DimensionsN/A
Manufacturer

MPN

Condition

Connector 1

Red Ring Terminal

Connector 2

Red Ring Terminal

Cable Length

2 Foot (60.96cm), 3 Foot (91.44cm), 4 Foot (121.92cm), 5 Foot (152.4cm), 10 Foot (304.8cm)

Insulated Material

XLPE

Cable Size

16mm2 2/0 AWG

Cable Material

100% Tinned copper

Strand design

224×0.3mm

Reviews

There are no reviews yet.

Be the first to review “Dual wall insulation XLPE Battery Cable Red / Red 2/0 AWG 3/8 inch Lugs – Made in USA”

Your email address will not be published. Required fields are marked *